Filter
Top Products
4
V-Lock
™
Wall Mount Assembly Kit • Installation
Lift the speaker up to the
wall mount assembly....
V Lock
Groove
Box
Bracket
V Lock
Groove
Box
Bracket
...and slide it down
into the V-lock groove.
Figure 5 — Slide the speaker down onto the wall
mount assembly
2. If re-installing two speakers, repeat all the installation and
speaker mounting steps for the second speaker, then go to
"Final adjustments" section on the following page.
Mounting the SI 28 speaker onto the wall mount assembly
1a. Carefully lift the speaker up as close to the bottom of the
wall mount assembly as possible and hook the right outer
edge of the speaker box bracket over the right inner edge
of the V-lock groove (see figure 6).
N
Holding the speaker so that the lowest part of the speaker
is as close to the bottom of the V-lock groove as possible
makes it easier to hook the two parts together.
Figure 6 — Hook the speaker over the edges of the
V-lock groove on the wall mount assembly
1b. Rotate the speaker until the speaker box bracket left edge
hooks over the left edge of the V-lock groove (see above).
1c. When the bracket is securely over the V-lock groove, gently
slide the speaker down until it locks into place.
2. If re-installing two speakers, repeat all the installation and
speaker mounting steps for the second speaker, then go to
"Final adjustments" section on the following page.
V Lock
Groove
Box
Bracket
Lift the speaker to the
wall mount assembly,
keeping it as low as
possible.
V Lock
Groove
Hook this
side first.
Box
Bracket
Box
Bracket
V Lock
Groove
Step 1a
Step 1b
Top View
Swivel and
hook this
side second.