Filter
Top Products
GX 75
9
us
4. Mounting instructions.
Before any work on the machine itself, pull the power plug from the socket outlet.
Assemble the undercarriage as shown. (Figure 3)
Place the machine on the floor with the top side facing down and mount the undercarriage according
to the figure and instructions on the DVD. (Figure 4)
Due to the danger of accidents, this work must be carried out by persons that are phys-
ically capable of lifting the high weight of the machine.
Fasten the undercarriage to the ground with suitable anchor/screw connections. The fastening must
be suitable to withstand the forces occurring during working.
5. Electrical connection (see appendix).
Hazardous Voltage
Contact may cause electric shock or burn.
The machine is not equipped with a mains plug and must be connected to the power supply. The elec-
trical connection, which is to be provided by customer, must be carried out by a qualified electrician.
Observe mains voltage:
The mains voltage and the frequency of the power source must agree with
the data on the type plate of the machine.
Before starting operation for the first time, check the rotation direction of the motor. The rotation
direction may be changed only by a qualified electrician.
WARNING
WARNING
Under-
carriage
Tension lever,
undercarriage
Tension lever,
undercarriage
Screw
Fig. 3
Fig. 4
WARNING
GX75.book Seite 9 Freitag, 18. April 2008 11:14 11