Filter
Top Products
Quickstart
30 FS-4 HD and FS-4Pro HD Portable DTE Recorders
Syncro Slave Recording
Syncro slave recording allows the FS-4 HD to mimic
camcorder operations by monitoring the state of the
camcorder’s tape recorder controls.
1. Verify that the FS-4 HD is in STOP mode.
2. From the FS-4 HD Home screen, press the
Right navigation
button several times until the Control screen appears:
3. Use the
Down navigation button to select Syncro Slave. The
dash on the left side of an item indicates it is the current
selection. The default value is
Local.
4. Press the
Select navigation button.
5. The beginning screen returns and a
Pause indicator
appears in the upper left-hand corner. Next to this symbol,
is a
Y indicating that FS-4 HD is following the state of the
camcorder’s tape controls, i.e. record when the camcorder
records and pause when it pauses.
6. Now the FS-4 HD will respond to the camcorder’s tape
controls. The recording signal goes both to the tape in the
camera and to the FS-4 HD.
Recording Timecode in the File
Select
EXT TC in the Setup menu. This option records the video
camera timecode in the file. For other available timecode options
refer to
TIME CODE EXT, REC RUN, FREE RUN, REGEN on page
67,.
Function buttons
The tasks discussed above are available for programming into the function
buttons. For information on setting up function buttons, refer to the section,
Functions Screen on page 72
CONTROL
LOCAL
AV / C
-SYNCRO SLAVE
TAPELESS