FOCUS Enhancements DR-HD100 DVD Recorder User Manual


 
DR-HD100: Using with a Computer
ProHD DR-HD100 Portable DTE Recorder 39
HD Resolution and Frames
M2T filename format: YYYYMMDD-HHMMSSX01.m2t where
the X is a letter indicating the resolution of the captured video file.
The table below lists letters and associated resolutions. Not all
HDV camcorders support these resolutions.
DR-HD100 and FAT 32
The FAT32 file system limits file size to a maximum of 2GB which,
depending on record mode and resolution, approximately equals the
following minutes of video:
DV 9 minutes
720p 13 minutes
1080i 9 minutes
When clips exceed 2GB in size, the DR-HD100 automatically creates
a new, file without dropping any frames. The two files have the same
root filename but have different two digit suffixes that indicate the
order of their creation, -01, -02, and so on. This process can produce
as many sequential 2GB files as the drive can hold.
With most DV and many HDV compatible NLE systems on Windows
or Macintosh computers, it is possible to use clips within the timeline.
Select the clips on the source volume, i.e. the connected DR-HD100,
and import them directly into the NLE bin.
This makes clips immediately available in the NLE timeline.
X Resolution X Resolution
d 720p, 23.976 fps D 1080i, 23.976 fps
b 720p, 24 fps B 1080i, 24 fps
c 720p, 25 fps C 1080i, 25 fps
a 720p, 29.97 fps A 1080i, 29.97 fps
e 720p, 30 fps E 1080i, 30 fps
f 720p, 50 fps F 1080i, 50 fps
g 720p, 59.94 fps G 1080i, 59.94 fps
h 720p, 60 fps H 1080i, 60 fps
y 576p, 50 fps
z 480p, 60 fps