Filter
Top Products
6. If select USALS, Delete All item will turn grey.
Local Longitude, Local Latitude: Press
keys to switch between West and East,
or press keys to switch between North
and South. Press OK key to enter into the editing
mode. Use numeric keys (0-9) to input the
longitude or latitude, press MENU key or EXIT
key to exit. The range of the longitude is from 0
to 180,while the range of the latitude is from 0 to
90. If the inputted value is not in this range,
system will pop up a dialogue "Our of Range"
when exit from this window. You can press OK
key to close this dialogue.
7. Motor Setting: Press OK key to enter into the
Motor setting window.
Satellite, Transponder: Press keys to
select satellite or transponder, or press OK key
to pop up the drop-down list and select in the list.
2.4 Single Satellite Search
1. Satellite :
2. FTA Only: Press keys to select
between Yes and No.
3. Scan Channel: Press keys to
select among TV+Radio, TV Channel, Radio.
Press keys to select the
satellite in circle. Or press OK key to pop up
the drop-down list, then select the desired
satellite in the list and press OK key to
confirm.
4. Network Search: Select between No and
Yes. This item turns grey when Auto Scan is
selected in the following Scan mode item.
5. Scan Mode: Press keys to select
between Auto Scan and Preset Scan. Auto
Scan is Blind scan, while Preset Scan is to
search the preset frequencies.
6. Search: Press OK key to start searching.