Filter
Top Products
Physical Port Settings
Physical Port Settings
This chapter covers features that are associated with FortiSwitch physical ports.
Diagnostic Monitoring Interface (DMI) Module Status
DMI is only supported on the following models: FortiSwitch-1024D, FortiSwitch-1048D, and FortiSwitch-
3032D.
The FortiSwitch-3032D also supports a 40G DMI.
DMI module status can be viewed using the command get switch modules. This allows you to display one of
the following:
l Module details (detail)
l Eeprom contents (eeprom)
l Module limits (limit)
l Module status (status)
l Summary information of all a port’s modules (summary)
Below is an example output for the command switch modules detail:
Port(port38)
identifier SFP/SFP+
connector LC
transceiver 10G Base-SR
encoding 64B/66B
Length Decode Common
length_smf_1km N/A
length_cable N/A
SFP Specific
length_smf_100m N/A
length_50um_om2 80 meter
length_62um_om1 30 meter
length_50um_om3 150 meter
vendor FINISAR CORP.
vendor_oid 0x009065
vendor_pn FTLX8572D3BCL
vendor_rev A
vendor_sn UDK050K
manuf_date 02/20/2009
17
FortiSwitchOS-3.2.0