Filter
Top Products
Warning: Never install or remove a
BOOKMAN cartridge when your
BOOKMAN is on. If you do, informa-
tion you have entered in the built-in
book as well as in the cartridge will be
erased
.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs of the cartridge
with the notches in the slot.
4. Press the cartridge down
until it snaps into place.
Installing Cartridges
➤ Removing Cartridges
Warning: When you remove a
BOOKMAN cartridge to install an-
other, information that you entered
in the removed cartridge is erased.
Selecting Books
Once you have installed a cartridge
in your BOOKMAN, you can select
which book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
.
These are sample books.
3. Press or to highlight the
book you want to use.
4. Press
ENTER
to select it.
➤ About Screen Illustrations
Some screen illustrations in this
User’s Guide may differ from what
you see on screen. This does not
mean that your BOOKMAN is mal-
functioning.
4