Filter
Top Products
GB
1
7
Start Up
Note: You can plug the USB cable into your computer and unplug it while
the computer is running ("hot plug & play"). Remove the cable from the
computer when doing so, never remove the cable from the drive when
the computer is on.
For optimal performance, the Freecom DVD RW Recorder should always
be connected to a USB 2.0 port.
1.2 Power Switch
The Freecom DVD RW Recorder is always powered, even if the USB cable is disconnected
from your computer. Therefore, please turn o the Freecom DVD RW Recorder if it is not
used. The power switch is on the back side of the Freecom DVD RW Recorder.
Attention! Before switching off the Freecom DVD RW Recorder manually,
make sure to safely remove the Freecom DVD RW Recorder via your op-
erating system (the „unplug or eject hardware“ option in the Windows
taskbar). Failing to do so may result in loss of data.
Note: In the event of no sound when an audio CD is placed into the Free-
com DVD RW Recorder, "Enable Digital CD audio for this CD-ROM device"
from within "Control Panel"-"Multi Media".