Fujitsu P42HHA40A Flat Panel Television User Manual


 
E-21
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
ADJUSTING THE PICTURE
Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU
OPERATIONS on page E-20 for the basic operation procedures.
Adjusting the Signal Contrast
Press F to increase the input signal contrast.
Press
E to reduce the input signal contrast.
Press < to store.
Adjusting the Drive Contrast
Press F to raise the display’s luminance level, and increase the contrast.
Press E to lower the display’s luminance level, and reduce the contrast.
Press < to store.
Adjusting the Brightness
Press F to increase the brightness.
Press E to reduce the brightness.
Press < to store.
Adjusting Color
Press F to darken the color.
Press E to lighten the color.
Press < to store.
Adjusting the Tint
Press F to change the tint to a more greenish color.
Press E to change the tint to a more purplish color.
Press < to store.
Adjusting the Sharpness
Press F to sharpen the Sharpness.
Press
E to soften the Sharpness.
Press
< to store.
Adjusting the Ambient Sensor
Automatically adjusts the Sharpness to an optimized level that matches the brightness of the surrounding area.
Each time
E or F is pressed, the setting is switched.
On
<
Off
Press
< to store.
Note
The screen display disappears if there is no operation within approximately 60 seconds.
Depending on the model or the optional devices, some of the functions may not be available.
The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01661-01_E.book 21 ページ 2004年11月16日 火曜日 午後4時33分
Downloaded From TV-Manual.com Manuals