Fujitsu P42HHA40W Flat Panel Television User Manual


 
E-17
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
1
Press .
The currently selected mode will appear.
2
Press to select a desired Screen
Size.
Each time you press , a different Screen Size
appears. The sequences used are as follows:
When you are in a Video input mode
When you are in an RGB input mode
* Depending on the type of signal, some aspects
may not be selected.
* You can also use the buttons
on the display’s control
panel to perform these steps.
(Ex. the W/R models)
Normal mode
Wide1 mode
Note
Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
A variety of Screen Sizes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.
•See P.
E-27 for how to adjust the picture size and position.
MHD01661-01_E.book 17 ページ 2004年11月16日 火曜日 午後4時33分
Downloaded From TV-Manual.com Manuals