Fujitsu P42HHA4OA Flat Panel Television User Manual


 
E-23
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-20.
Even more advanced Sharpness adjustments can be made as required.
Adjusting the Black Level
Press F to strengthen the reproduction of black. (Provides a picture quality with deep blacks.)
Press
E to weaken the reproduction of black.
Press < to store.
Setting Detail Gradation
Corrects the gradation of the light and dark areas of the picture.
Each time E or F is pressed, the setting is switched.
On
<
Off
Press < to store.
Setting 3D NR
This enables noise reduction processing with respect to the input signal noise level (reduces screen
flicker for more comfortable viewing).
Each time you press
E or F, the available choices appear in the following sequence.
Press
< to store.
Setting CODEC NR
This enables noise reduction processing of mosquito noise or block noise generated when digital picture
signals are recorded or replayed.
Each time you press
E or F, the available choices appear in the following sequence.
Press
< to store.
PRECISION SETTING (for the U model)
Precision Setting Selection
Screen
Note
The screen display disappears if there is no operation within approximately 60 seconds.
Depending on the model or the optional devices, some of the functions may not be available.
The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01661-01_E.book 23 ページ 2004年11月16日 火曜日 午後4時33分