Filter
Top Products
E-36
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
OTHER SETTINGS
DPMS for other then RGB1
You can use this option to select the amount of time before the DPMS function starts.
DPMS (which stands for “display power management signaling”) allows the display to maintain an
automatic power saving function.
This function causes on-screen information to disappear until the next input operation, if the power
is ON and the display has not received any signals for the predetermined period of time. When
DPMS is active, the power indicator lamp turns orange.
(1) Select DPMS and press
.
DPMS screen appears.
(2) Press
or to select Time.
(3) Each time you press
or , one of the available choices appears in the following sequence:
Off: Disables DPMS
Number: Approximate time before DPMS starts. (Unit: minutes)
* The power indicator lamp turns orange while the DPMS is ON.
* The power turns ON automatically when the display receives a signal.
(4) Can specify background colour.
Press
or to select background colour.
Each time you press
or , one of the available choices appears in the following sequence:
Black
White
Black: Mutes images in Black background.
White:Mutes images in White background.
* Switches approx. 20 seconds after the display stops receiving signals.
(5) Press
to store.
• Selecting input terminals (Audio Input)
You can use this option to select one of the three available terminals to receive sound from input
equipment.
(1) Select “Audio Input” and press
.
The “Audio Input” selection screen will appear.
(2) Press
or to select input equipment.
(3) Select a desired input terminal.
Each time you press
or , one of the available choices appears in the following sequence:
No audio: No sound in the corresponding mode.
Audio 1-3: Selects Audio 1 through 3 for receiving sound in the corresponding mode.
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press
to store.
*Audio Input menu will not be displayed when "No Audio"is selected.
DPMS selection screen
“Audio Input” selection screen