Filter
Top Products
E-20
ADJUSTING THE PICTURE (Continued)
• [Targeting White]
Corrects red, green, and blue with respect to white.
[Red]: Use
E and F to adjust Red.
[Green]: Use
E and F to adjust Green.
[Blue]: Use
E and F to adjust Blue.
Press
< to store.
Making the Progressive Scan Settings
This sets the conversion processing of interlace signals to block receive signals.
• 24 Frame Mode
This function enables the optimized display of movies, etc. with 24 frames/second signals.
Each time
E or F is pressed, the setting is switched.
<
Auto
<
Off
<
Press
< to store.
• 30 Frame Mode
This function enables the optimized display of movies, etc. with 30 frames/second signals.
Each time
E or F is pressed, the setting is switched.
<
Auto
<
Off
<
Press
< to store.
• Jaggies Filter
This function alleviates the phenomenon where jagged diagonal lines can be seen when interlace signals are input, thus enabling a
smoother motion picture display.
Each time
E or F is pressed, the setting is switched.
<
Auto
<
Off
<
Press
< to store.
• Motion Setting
The detecting sensitivity for motion picture is set.
The response of the picture processing is valued in the motion picture priority setting.
Press
F: to specify still picture priority.
Press
E: to specify motion picture priority.
Press
< to store.
Progressive Scan Settings
Screen
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
7527_E.book 20 ページ ２００６年９月５日 火曜日 午後９時３５分
Downloaded From TV-Manual.com Manuals