Filter
Top Products
25
• Adjusting Contrast (Contrast)
Any value between -30 and +30 can be selected.
: Higher contrast
: Lower contrast
Press to store.
• Adjusting Screen Brightness (Brightness)
Any value between -60 and +60 can be selected.
: Brighter screen
: Darker screen
Press to store.
• Adjusting Color Darkness (Color)
Any value between -60 and +60 can be selected.
: Lighter colors
: Darker colors
Press to store.
• Adjusting Tint (Tint)
Any value between -30 and +30 for [ ], and -60 and +60 for [ ] can be selected.
: More greenish colors
: More purplish colors
Press to store.
• Adjusting picture Sharpness (Sharpness)
Any value between -16 and +16 for [ ], and -4 and +4 for [ ], can be selected.
: Sharper pictures
: Less sharp pictures
Press to store.
• Making gamma correction(Gamma)
You can use this option to make a dynamic gamma correction suitable for still or motion pictures.
Each time you press or , one of the available choices appears in the following sequence:
Dinamic 1, 2, 3: Suitable for watching a motion picture.(Use either of better picture quality.)
Static: Suitable for watching a still picture.
Press to store.
* Can select Static only in RGB mode.
• Adjusting Color Temperature (Color temp.)
Use or to specify a desired color temperature. Each time you press or , one of the available choices appears in the following sequence:
Warm: More reddish colors
Standard:Standard color temperature
Cool: More bluish colors
User: User Color Temp. setup
• Setting User Color Temp. (User Color Temp.)
Can set up when User is selected in Color Temp.
Press or to select Red, Green or Blue and press or to make adjustment in the range
of 0 to 255.
* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted
individually at the factory.
* On-screen information disappears if you do not take any action for about 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode
User Color Temp.adjustment screen