Filter
Top Products
E-20
USING THE FEATURES MENUS
• FEATURES setup screen has 5 options of Adjustment, Function, On Screen, Input Terminal and Others.
• Options with “ ” on the right
When you select an option with “ ”, press . The adjustment/setup screen for that option appears.(See P. E-28–E-35.)
You can use
or on this screen to make selections or changes.Press to store.
• Options with no “ ” on the right
When you select an option with no “ ”, press or to make selections or changes. Press to store. (See P. E-28–E-35.)
FEATURES Menu
HOW TO USE MENUS (Continued)
FEATURES Menu screen (Comp.video Input Mode)
Adjustment Menu screen Function Menu screen
On Screen Menu screen
Input Terminal Menu screen
Others(1/2) Menu screen
Adjustment Menu (See P. E-28–E-29.)
Option
(1) Dot Clock
(for RGB2, RGB3)
(2) Clock Phase
(for RGB2, RGB3)
(3) Vertical Sync
(for RGB2, RGB3)
(4) Clamp Position
(for Comp.video, RGB2, RGB3)
(5)Auto Calibration
(for RGB2, RGB3)
Function
Adjusts the dot clock.
Adjusts clock phase.
Corrects vertical
synchronization signal.
Adjusts clamp pulse phase.
Selects the optimum
dynamic range of images.
Operation
Eliminates blur when the
optimum value is selected with
or .
Eliminates blur when the
optimum value is selected with
or .
Use
or to select the
optimum value for eliminating
flicker.
Use
or for switching.
Display Auto Calibration screen
and press
to execute.
Select Execute, and select Yes
and press
to execute
Auto Calibration.
Range
-60 to +60
Auto/Manual
(Can adjust 1 to 32 for
Manual)
-1 to +1
-8 to +8
Execute
Yes/No