Filter
Top Products
E-9
English
Description of Input Terminals
RS-232C terminal (RS-232C)
0+A RGB3 input terminal (RGB3 INPUT/BNC)
Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal.
*When RGB3 input terminal is connected, Comp.video mode is not available. (See P. E-36.)
A Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.
*When Comp.video input terminal is connected, RGB3 mode is not available. (See P. E-36.)
B RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 Ω))
This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 Ω.
TTL : Does not terminate.
ANALOG (75 Ω): Terminates.
C Video1 input terminal (VIDEO1 INPUT/P-TE1000E)
Connect this terminal to the SCART terminal of your VCR or DVD, etc.
*See “SETTING THE INPUT TERMINALS” on E-35.
D S-Video input terminal (VIDEO2 INPUT/P-TE1010E)
Connect this terminal to the S-video output terminal of your VCR.
E Video input terminal (VIDEO1 INPUT/P-TE1010E)
Connect this terminal to the video output terminal of your VCR.
F Component video input terminal (VIDEO3 INPUT/P-TE1010E)
Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.
Pin No. Signal
1 DCD (Data Carrier Detect)
2 RD (Received Data)
3 TD (Transmit Data)
4 DTR (Data Terminal ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7 RTS (Request To send)
8 CTS (Clear To Send)
9 RI (Ring Indication)
DVI-D terminal (RGB1 INPUT/DVI-D)
RGB2 input terminal (RGB2 INPUT/mD-sub)
Pin No. Input signal Pin No. Input signal
1 Red 9 —
2 Green 10 Ground
3 Blue 11 —
4— 12—
5 Ground 13 Horizontal synchronization
6 Ground 14 Vertical synchronization
7 Ground 15 —
8 Ground Frame Ground
26101418
37111519
48121620
159131721
SCART terminal
Pin No.
Input Signal
1—
2 Right audio
3—
4
Audio ground
5 Blue ground
6 Left audio
7 Blue
Pin No.
Input Signal
8—
9
Green ground
10 —
11 Green
12 —
13 Red ground
14 —
Pin No.
Input Signal
15
Red/chrominance
16 —
17 —
18
Composite video ground
19 —
20
Composite video/Y
21 Ground
03.1.16, 11:49Page 9
Downloaded From TV-Manual.com Manuals