Filter
Top Products
E-8
PART NAMES AND FUNCTIONS (Continued)
Audio input terminals
Input audio through the terminals corresponding to the used video input terminals.
* The digital input terminals can be matched as desired with the remote control. (See P. E-29.)
Audio output terminals
For use when the audio from an audio system (amplifier) is used.
Video1 input terminal
Video2 input terminal
Video4 input terminal
Connect this terminal to the SCART terminal of your VCR or DVD, etc.
* See “SETTING THE INPUT TERMINALS” on P. E-40.
Video5 input terminal
Video6 input terminal
Connect this terminal to the Component Video Output terminal of DVD recorder/player or satellite receiver.
Video7 input terminal
Connect this terminal to the HDMI output terminal of DVD recorder/player or other video source.
RGB1 input terminal
Connect this terminal to the output terminal of a PC, set-top box, game, etc.
Display output terminals (Picture/Audio)
Connect these terminals to the picture input terminal and audio input terminals on the display.
Power input terminal
Connect this terminal to the power cord supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-14.)
Antenna input terminal
Please connect it to the antenna signal.
AV SELECTOR SECTION – REAR
MHD01862_E.book 8 ページ ２００５年１１月２５日 金曜日 午後８時５４分
Downloaded From TV-Manual.com Manuals