Filter
Top Products
DVD FUNCTIONS
EN
–
11
–
STANDBY-ON
OPEN/CLOSE
1
4
7
2
5
8
0
+10
3
6
9
CLEAR
PREV
NEXT
PLAY
STOP
PAUSE
Playback
4
3
STANDBY-ON
PREV PLAY NEXT STOP
OPEN/CLOSE
POWER PLAY HDMI
1
(
on page 12
)
Note:
•
For DVD, fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x), 5(100x).
• For audio CD, approximate speed is 1(2x), 2(8x), 3(30x).
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
Fast Forward / Reverse Search
Press [g] or [h] repeatedly during playback to
select the required forward or reverse speed.
To use [PREV H]], [NEXT G] on this unit
Pressing and holding
[PREV H]] or [NEXT G]
on this unit will also
change forward or reverse playback speed.
To continue playback, press
[PLAY B].
Resume Playback
Press [STOP C] during playback. Resume message will appear on
the TV screen.
Press [PLAY B], playback will resume
from the point at which playback was
stopped.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
Note:
• For DVD, set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the pause mode are blurred. Refer to pages 18-19.
Note:
• Slow forward or reverse speed is different depending on the
disc. Approximate speed is 1(1/16x), 2(1/8x), 3(1/2x).
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the slow playback mode are blurred. Refer to pages 18-19.
Before:
Turn on the TV, amplifier and any other
components which are connected to this
unit. Make sure the TV and audio receiver
(not supplied) are set to the
correct channel.
Slow Forward / Reverse Search
Press [g] or [h] repeatedly in the pause mode to
select the required forward or reverse speed.
To use [PREV H]], [NEXT G] on this unit
Pressing and holding
[PREV H] or [NEXT G]
on this unit in the
pause mode will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Note:
• To cancel resume, press [STOP C] one more time in the stop
mode.
• For JPEG, playback will resume from the beginning of the track
at which playback was stopped.
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
Note:
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for details.
To use [PREV
H]], [NEXT G] on this unit
Press once to skip chapters, tracks or titles to a desired point.
E
1
1
e.g.) DVD
1
To open the disc
tray
2
Insert a disc with
label facing up.
3
To start playback
4
To stop playback
PLAY
STOP
STANDBY-ON
OPEN/CLOSE
1
1 23 4
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Disc Menu
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press [OK]
(or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [DISC MENU] to call up the disc menu.
• Press [TITLE] to call up the title menu.
Note:
• When you play back a CD-RW/-R with JPEG files, details on page 12.
•
“ ”
may appear at the top-right on the TV screen when the operation is prohibited by
the disc or this unit.
• Some DVD may be played back from title 2 or 3 due to specific programs.
• During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st
layer is being switched to the 2nd layer. This is not a malfunction.
• You can change the on-screen language for DVD function in “PLAYER MENU” menu. Refer to page 18.
• When the unit is connected with an HDMI cable, a revocation list update screen may appear when
you try to play back the DVD-video containing a revocation list.
• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal
may not be output when playing back a commercial DVD-video.
E6E75UD_DP170MW8B_EN_v1.indd 11E6E75UD_DP170MW8B_EN_v1.indd 11 2009/02/04 10:45:172009/02/04 10:45:17