Filter
Top Products
DVD Functions
EN
–
11
–
STANDBY-ON OPEN/CLOSE
DISPLAY VCP DVD MODE
TRACKING
PLAY
STOP
123
456
789
0
+10
CLEAR/
C. RESET
DVD Functions
Playback
4
3
STANDBY-ON
POWER ON
REW F.FWD STOP/EJECT PLAY
SOURCE
VCP
OPEN/CLOSE
DVD
PREV STOP
DISC IN
PLAY
PLAY NEXT
IR
PLAY CAS.IN
2
Lights up when power is on.
1 3
DV
DV
D
Hint
• Zooming function does not work while the disc menu is displayed.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or [h]
repeatedly in the zoom mode.
• In the zoom mode, it automatically changes
x2(x4) to the
zoomed position guide.
Hint
•
For DVDs, fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50), 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8), 3(x30).
Paused and Step-by-Step Playback
DV
DV
D
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
DV
DV
D
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
Fast Forward / Reverse Search
DV
DV
D
Press [g] or [h] repeatedly during playback to
select the required forward or reverse speed.
To use [PREV H], [NEXT G] on this unit
Pressing and holding
[PREV H] or [
NEXT G
]
on this unit
will also change forward or reverse playback speed.
To continue playback, press
[PLAY B].
DVD menu
DV
DV
D
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
DV
DV
D
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Resume
DV
DV
D
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Resume ON
Hint
• A “prohibited icon” may appear at the top-right on the TV screen when the operation
is prohibited by the disc or this unit.
• Some DVDs may be played from title 2 or 3 due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a moment. This
happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if
pictures in the pause mode are blurred. (Refer to 16-17.)
Hint
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8), 3(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to 16-17.)
Zoom
DV
DV
D
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom
factor: x2, x4 or OFF.
x2 x4
3) Press [K / L / s / B] to slide the zoomed picture across
the screen.
4) To exit zoom mode, press [ZOOM] to select OFF.
Before: Turn on the TV, amplifier and
any other components which are
connected to this unit. Make sure the
TV and audio receiver (not included)
are set to the correct channel.
TIP:
You can change the on-screen language for DVD function in “PLAYER MENU” setting. (Refer to 16.)
Slow Forward / Reverse
DV
DV
D
Press [g] or [h] repeatedly in the pause mode
to select the required forward or reverse speed.
To use [PREV H], [NEXT G] on this unit
Pressing and holding
[PREV H] or [NEXT G]
on this
unit in the pause mode will also change forward or reverse
playback speed.
To continue playback, press
[PLAY B].
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• The resume information stays on even when the power is turned off.
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for details.
To use [PREV H], [NEXT G] on this unit
DV
DV
D
Press once to skip chapters, tracks or titles to a desired point.
E
1
1
12
Insert a disc with
label facing up.
3
To start
playback
4
To stop
playback
PLAY
STOP
STANDBY-ON
OPEN/CLOSE
1
1 4