Filter
Top Products
29
EN
When scanning both TV and DTV at the same time
* You can access this menu from both modes
(analog / digital).
1 Display the menu screen and select
”CHANNEL SET".
• Press [MENU] and select "CHANNEL SET"
using
[CH
K
/
L
].
• Press
[VOL
X
].
2 Using [CH
K
/
L
], select "AUTO PRESET
CH(TV/DTV)".
• Press
[VOL
X
].
Scanning and memorizing the channels auto-
matically starts.
• When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
analog broadcasting will be displayed. If no
analog channel is memorized, the memorized
smallest channel in the digital broadcasting will
be displayed.
NOTES:
• If you press [POWER] or [MENU] while setting AUTO PRE-
SET CH, AUTO PRESET CH setting will be canceled.
• If there is no TV signal input, "NO TV SIGNALS" will appear
on the display after the completion of channel scanning.
AUTO PRESET CH(TV/DTV)
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
DTV TV
When scanning DTV
1
Select digital mode by pressing [DTV/TV].
2 Display the menu screen.
• Press
[MENU].
The following menu screen is displayed.
3 Select "CHANNEL SET".
• Using
[CH
K
/
L
], select "CHANNEL SET".
• Press
[VOL
X
].
4 Using [CH
K
/
L
], select "AUTO PRESET
CH(DTV)".
• Press
[VOL
X
].
Scanning and memorizing the channels auto-
matically starts.
• When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
digital broadcasting will be displayed.
AUTO PRESET CH(DTV)
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
DTV
OTHER SETTINGS
NO TV SIGNALS