Filter
Top Products
4
EN
I
NTRODUCTION
Symbols Used in this Manual
The following is the description for the symbols used in this manual.
Description refers to:
DTV
: Digital TV operation
TV
: Analog TV operation
If neither symbol appears under the function heading, operation is applicable to both.
5
•
Attaching the Stand
You must attach the stand to the unit to display upright. Be sure the front and rear of the stand match the proper direction.
5
f
r
o
n
t
s
i
d
e
f
r
o
n
t
s
i
d
e
Note:
• Make sure to use a table which can support the weight of this unit and is larger than this unit.
• Make sure the table is in a stable location.
1
Spread a thick and soft cloth over a table. Place the main
unit face down onto it.
Make sure not to damage the screen.
2
Insert the stand all the way to the main unit slowly until
it clicks.
Make sure not to put the AC power cord between the
stand and the unit.
owner’s manual
(1EMN23800)
remote control
(NF606UD)
batteries
(AA x 2)
To remove the stand from this unit
Grip the levers on the bottom stand and remove the stand
from the unit slowly.
Be careful not to drop the stand when you remove it.
lever
Supplied Accessories5
If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free
customer support line found on the cover of this manual.
Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters).
Contact your local electronics store for these items.
•
•