Filter
Top Products
Time
Press MENU button on the remote and ◄/► use to cycle to TIME page below:
Clock:
Set TV system time settings
» Select Clock
» Press ◄ or ► to cycle through available clock settings:
Date, Month, Year, Hour and Minute.
Sleep Timer:
» From the TIME menu select Sleep Timer
» Select Sleep Timer setting:
O, 10min, 20min, 30min, 60min, 90min, 120min, 180min or 240min
Auto Sleep:
» From the TIME menu select Auto Sleep.
» Select ON or OFF
Time Zone:
» From the TIME menu select TIME ZONE.
» Select your Time Zone
Off Time:
Set TV system to turn o automatically.
» From the TIME menu select O Time
» Press ◄ or ► to select O Time mode:
O, Once, Every Day, Mon - Fri, Mon - Sat, Sat -Sun or Sunday
» Set the Hour and Minute
On Time:
Set TV system to turn on automatically.
» From the TIME menu select On Time
» Press ◄ or ► to select On Time mode:
O, Once, Every Day, Mon - Fri, Mon - Sat, Sat -Sun or Sunday
» Set the Hour and Minute
» Select the input source
» If ATV or DTV source is selected, also select the program number
» Select the Volume setting at turn on
009
004
Basic Operation
Power
To operate the HDTV:
» Ensure you have connected the HDTV correctly and that power is supplied to the TV.
» A RED LED indicates Standby Mode. A GREEN LED indicates the HDTV is ON.
» Press the POWER button to power ON the television. The front LED will change from
RED to GREEN to indicate that that HDTV has been turned ON.
» Press the POWER button to power OFF the television. The front LED will change from
GREEN to RED to indicate that that HDTV has been turned OFF.
Numeric Keypad
To directly select a channel or chapter number:
» Press the required number from 0-9 on the keypad. It will directly change to the
choosen channel/chapter.
» To select a 2-digit channel/chapter number, press the -/-- button followed by the
numbers you desire.
Channel +/-
» Press the + button to change the channel/chapter up.
» Press the - button to change the channel/chapter down.
Volume +/-
To adjust the volume:
» Press the VOL+ button to increase the volume.
» Press the VOL- button to decrease the volume.
Mute
To mute the audio:
» Press the MUTE button to mute the audio. (Note: This will not mute the line-level
audio output).
» The HDTV will indicate that it is in a mute state.
» Press the MUTE button to un-mute the audio.
Display
» Press the DISPLAY button to preview the curent program number, current input mode,
or any relevent source information.
» Press the DISPLAY button again to remove this information.
» Press CH- or CH+ to scan through channels.
» Press VOL- or VOL+ to decrease or increase the sound level.
» Press MENU to bring up the main menu screen.
» Press SOURCE to select the input source.
» Press to play/pause
» Press to eject the disc when in DVD source only
» Press POWER button to alternate between standby and ‘on’ modes.
Control Description