Filter
Top Products
Setting up for TV, VCR, Cable , or Satellite
1.Turn on the device you want to con-
trol (TV, VCR, cable box, etc.).
2.Press and hold SETUP until the LED
indicator lights steadily. Release the
SETUP button.
3.Press and release mode button for
the device you want to control (TV,
DVD, VCR, Cable or Satellite). The
LED blinks once. (See notes on next
page).
4.Enter the 3 digit Code from the Library
Code Table (separate sheet). The LED
turns off after the last digit entered.
5.Point the remote at the device and
press the POWER button. Your device
should turn off.
6.Turn your device on and press
CHAN+. If the device responds, setup
is complete.
5
6
3
2
4
7