Filter
Top Products
4
Learning Function
The learning feature is used as a supplement to the standard prepro-
grammed library. The standard code library provides most of the
functions needed, but you can add a small number of additional
functions of your choice.
Note: No functions may be stored under the LEARN, SLEEP, CODE
SEARCH, MENU or any of the device buttons.
1. Place the 94940 remote control unit
and the Original remote control unit
so that they face each other. They
should not be any more than 2 inches
apart.
2. Press and hold the CODE SEARCH
button until the INDICATOR LIGHT
lights, then release the CODESEARCH
button.
3. Press and release the desired Mode
button (TV, VCR, CABLE, SAT, etc. . . .)
The INDICATOR LIGHT will blink off
once button press is accepted.
4. Press and release the LEARN button.
5. Press and release the valid button to
be learned on the 94940 remote in which
you will store a new function. The L1,
L2, L3 or other functions keys may be used
in this programming mode.
6. Press and hold the button on the original
remote control until INDICATORLIGHT
on the 94940 remote blinks once. Once the
INDICATORLIGHT blinks you may con-
tinue with the next function.
If there is error in learning the new func-
tion the INDICATOR LIGHT will flash for
3 seconds but remain in the learning mode.
Return to step 5 if the INDICATORLIGHT
flashed.
NOTE: Hold the function key on your origi-
nal remote for at least 3 seconds for the com-
mand to be successfully learned.
7. Repeat steps 5 and 6 to store more func-
tions.
8. Once the selected functions are stored
press the CODESEARCH button and the
remote will return to original operation
mode.
2 inches
CD CBL/SAT
BLINK
LEARN
L1 L2 L3
94940 Revised Size 10/18/02 12:22 PM Page 5