Filter
Top Products
14
On-Screen Display (OSD)
The On-Screen display provides feedback on the cur-
rent status of the DVD+VCR.
❶❷ ❸ ❹ ❺
❻❼
❶TAPE SPEED DISPLAY
Shows the current tape speed.
❷FUNCTION DISPLAY
Indicates the function in progress.
❸HI-FI DISPLAY
Indicates when this unit is playing back tape recorded in
Hi-Fi.
❹CHANNEL DISPLAY
I
ndicates the selected channel (or LINE1, LINE2).
❺STEREO/SAP DISPLAY (MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
❻DATE DISPLAY
Shows the current date.
❼CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, tape counter and remaining time on
the tape.
Each press of the ENTER button changes the TV
screen in the following sequence.
otes
The function displays will remain on the TV screen for 5 sec-
onds.
The clock (or tape counter, tape remaining) mode will contin-
ue until you press ENTER.
The tape counter and remaining tape length indicator appear
only when a cassette is inserted. Also, the remaining tape
length indicator appears after any tape operation.
EASY INFORMATION
If Extended Data Service (XDS) signals are provided
along with normal TV signals in your area or during
playback of a tape recorded with Extended Data Service
(XDS) signals, the station ID, program title and program
details are shown on the TV screen.
When viewing a channel with Extended Data Service (XDS)
signals, press ENTER and the station ID will appear on the
TV screen. Press ENTER again and the program details will
appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the pro-
gram title and program details will appear on the TV
screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
Setting the On-Screen Display
The VCR's on-screen menu system allows you to set
the clock, channels, timer recordings, and other setup
options.
Menu Selection
Follow these steps to access the VCR's on-screen
menu system.
11
Press MENU and the MAIN menu will appear.
22
Select the desired menu using the v/V buttons
and then press ENTER.
ote
Menus remain on-screen for 3 minutes.
33
Press MENU when finished.
VCR Operation Setup
PLAY HI-FI CH 4
SP STEREO
OCT 8 , FRI 2:15 PM
REM 1:58
0:35:40
2:15 PM
STOP CH 4
SP STEREO
OCT 8 , FRI 2:15 PM
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
CH 4
SP WABC STEREO
“Home video”
OCT 8 , FRI 2:15 PM
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
CLOCK SET (page 16)
PROGRAM (page 22)
TUNING (page 15)
SETUP (page 15)
MAIN MENU