Filter
Top Products
38
DVD+VCR User’s Guide
A/V RECEIVER/STEREO HOOKUP
STEREO CONNECTION
1 CONNECT DVD+VCR TO STEREO
Connect RCA cables from either of the
”Line Out” audio jacks (R and L) on the
back of the DVD+VCR to the line inputs
of your stereo receiver.
2 SET STEREO TO AUXILIARY
MODE
Set your stereo receiver to “Aux” or
“Line” (refer to your stereo owner’s
guide for the proper setting).
Follow these steps to connect your DVD+VCR to an
A/V receiver or stereo system using the Line Out or
Digital Audio Out jacks.
OR
OR
Connect to Stereo
Line Inputs
Connect to the Digital Audio Input
of an A/V Receiver with a Dolby
Digital and/or DTS Decoder.
DIGITAL AUDIO OUT CONNECTION
1 CONNECT DVD+VCR TO A/V
RECEIVER
Connect EITHER a digital optical cable
OR a digital coaxial cable from the
Digital Audio Out jacks on the back
panel of the DVD+VCR to their corre-
sponding Digital Audio Inputs on your
A/V Receiver.
• Use whichever connection is avail-
able on your A/V Receiver (Optical
or Coaxial).
2 SET DOLBY & DTS DECODER
SETTINGS
If your A/V Receiver is equipped with a
Dolby Digital and/or DTS Decoder, you
must enable these options in the menu
system (see next page).
NOTE
• The Digital Audio Out connections ONLY carry DVD audio—not the VCR or tuner.