Filter
Top Products
Repair
334599A 5
Repair
Trigger Lock
Always engage the trigger lock when sprayer
is stopped to prevent the gun from being
triggered accidentally by hand or if dropped
or bumped.
Pressure Relief Procedure
1. Engage trigger lock.
2. Turn ON/OFF switch to OFF position.
Wait 7 seconds for power to dissipate.
3. Unplug power cord or shut engine off.
4. Engage trigger lock.
5. Remove tip guard.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection, splashed fluid
and moving parts, follow the Pressure
Relief Procedure whenever sprayer is
stopped and before sprayer is cleaned or
checked, and before equipment is
serviced.
ti24612a
ti24851a
ti24852a
ti24853a