Graco Model 244512 Series C Home Theater Server User Manual


  Open as PDF
of 4
 
332981A
EN
Kit Instructions
Pressure Roller
Model 244512, Series C / Model 16W441, Series A
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure*
• 20 in. (50 cm) heavy-duty extension
• 45° swivel adapter
• 9 in. (23 cm) roller frame
• 1/2 in. (13 mm) nap roller cover
*Use the lowest pressure that provides an even paint supply to
the roller; typically less than 300 psi (2.1 MPa, 21 bar)
Important Safety Instructions
Read all warnings and instructions in this man-
ual. Save these instructions.
NOTICE
Never leave water in the pump, gun, or pressure roller.
Doing so could cause corrosion and damage from
freezing. For storage, flush the system with Graco
Pump Armor
™
or mineral spirits/paint thinner.
To find your local Graco/Magnum
authorized service center:
• 1-888-541-9788
• Magnum.Graco.com
• Graco/Magnum Authorized
Service Centers list 302367
ti22333a
next