Filter
Top Products
COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL10589 PRINTED IN TAIWAN
What Changed?
We have added a sleeve guard to the sander to
help reduce the risk of entanglement. The sleeve
guard MUST be installed on the idler roller guard
using the lock knobs and flat washers, as shown
in Figure
1.
Install the idler roller guard and sleeve guard onto
the idler roller after belt tension and tracking are
properly set, as described on G1014Z Manual
Pages 12 & 13
.
This update covers changes made to the machine after the owner's manual was printed. All page num-
ber references refer to the owner's manual for this machine. Keep this update with your owner's man
-
ual for future reference. If you have questions, contact Tech Support at (570) 546-9663 or by email at
techsupport@grizzly.com.
MODEL G1014Z/G1014ZX
COMBINATION SANDER
MANUAL UPDATE
Figure 1. Installing sleeve guard.
Machine Inventory (See Page 6)
The following items have been added. Refer to
the full manual for a description of the main inven
-
tory.
Box Contents
: Qty
A. Sleeve Guard ............................................ 1
B. Lock Knobs ............................................... 2
C. Flat Washers #10 ....................................... 2
New Sleeve Guard Parts
Idler Roller
Guard
Sleeve Guard
Lock Knob
#10 Flat
Washer
REF PART # DESCRIPTION
114A P1014Z114A IDLER ROLLER GUARD V2.03.08
114A-1 P1014Z114A-1 SLEEVE GUARD
126 P1014Z126 LOCK KNOB
127 PW03 FLAT WASHER #10
114A-1
127
126
127
126
114A
Figure 2. New sleeve guard parts.