Filter
Top Products
25
ENGLISH
USB RECORDING
--------------------------------------------------------------------------------------------------------------
Connecting external data media
Notes:
7
Before connecting the data medium, switch
the television to standby with
»8«
. Connect
the device and then switch the television on
again.
7
Before removing the external data medium,
the television must be switched to standby,
so that no data loss occurs.
7
Your television features two USB sockets,
»USB«.
»USB« is used to connect data media,
which require an additional power supply
– for example, external hard disks.
1 Connect the »USB1« socket of the television
and the corresponding socket of the data
medium (external hard disk) using a USB ca-
ble;
2 Confirm the display »
« with »
«
(green).
– The file browser appears.
Notes:
7
If you use a network cable for external hard
disks which have been connected to the
»USB1« socket of the television, this network
cable must also be disconnected from the
power supply when the television is switched
off.
7
External data media may not be disconnect-
ed from the television while files on the data
medium are being accessed.
Settings for USB recording
Selecting the menu
1 Open the menu with »MENU«.
2 Select the line »USB RECORDING« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
– The »USB RECORDING« menu appears.
PRnP
Disk
Safely Remove Disk
Auto Preview
USB
On
Partition
Exit
Back
USB RECORDING
Manage data medium
Capacity Used %3
Used (MB) 1249
Total (MB) 38145
Remaining SD recording time 1,008 min
Remaining HD recording time 288 min
20.09.2010
15:46
OK
C: