Grundig 32VLC9140S Flat Panel Television User Manual


 
ENGLISH
14
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Initial set-up and tuning
television channels
The television set is equipped with automatic
channel search, which searches for satellite chan-
nels (DVB-S), terrestrial channels (DVB-T), cable
channels (DVB-C) and analogue channels.
You start the search and can then copy the tel-
evision channels into four favourite lists and sort
them there into your order of preference.
For DVB-S channels there are 6000 presets
available, for DVB-T and DVB-C channels 1000
presets, and 100 presets for analogue channels.
The various settings
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
7
Tunes digital television channels from the satel-
lite, from page 15.
You have two options for this search:
the basic installation which presets a stand-
ard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
the professional installation, which allows
you to make all required settings and set pa-
rameters for your receiver system.
7
Tunes digital terrestrial television channels, on
page 17.
7
Tunes digital television channels from the
cable provider, on page 17.
7
Tunes analogue television channels, in the
chapter “Special functions”, starting on
page 56.
7
Further settings for digital television channels
after the initial set-up can also be found in
the chapter “Special functions”, starting on
page 51.
Note:
7
Make the language and country selection for
all types, then continue reading the respective
chapter.
Selecting language, country and
operating mode
1 Switch on the television set from standby with
»
8«, »1…0« or »P+« or »P-«.
During initial set-up, the »Installation Guide«
will be displayed.
Help:
7
If this menu is not displayed, restore the
television set to its default settings (see
page 42).
2 Select the menu language with »
<
«, »
>
«,
»
V
« or »
Λ
« and press »OK« to confirm.
3 Select the mode with »
<
« or »
>
« and press
»OK« to confirm.
The settings used in »Home Mode« help to
save energy.
Alternatively, the menu item »Shop Mode«
can be selected which the retailer can use
for demonstrating the device functions.
Note:
7
End the »Shop Mode« by restoring the televi-
sion set to its default settings (see page 42).
4 Select the country in which the television set
is operated with »
<
«, »
>
«, »
V
« or »
Λ
« and
press »OK« to confirm.
The »Source Setup« menu appears with the
»Connection Type« line marked.
Note:
7
You can find a description of how to tune
the television channel of your choice – de-
pending on the antenna connected – in the
following chapters.