Filter
Top Products
6
High definition – HD ready
Your television can playback high-definition television signals (HDTV).
You can connect the input sources (HDTV set-top box or High Definition
DVD player) to the »
HDMI
« or »
DVI-I
« socket (digital HDTV signal).
This ensures that you can view digital HDTV programmes, even if they
are copy-protected (HDCP High Bandwidth Digital Content Protection).
Putting batteries in the remote control
1 Open the battery compartment by taking off the lid.
2 Put in the batteries (AA, 2 x1,5 V).
Make sure the polarity is correct.
3 Close the battery compartment.
Note:
If the television no longer reacts properly to remote control com-
mands, the batteries may be flat. Always remove used batter-
ies. The manufacturer accepts no liability for damage caused
by leaking batteries.
Environmental note
Batteries, including those which contain no heavy metal, should
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
CONNECTION AND PREPARATION