Grundig MPaxx 940 Home Theater Server User Manual


 
8
GENERAL FUNCTIONS
-------------------------------------------------------------------------------
Switching on and off
1 To switch on the player, press and hold down » «.
– The LED switches on and starts flashing.
Playback then starts automatically (playback always starts with the first
track in the root directory – if there is one).
– The LED flashes during playback.
2 To switch off the player, press »
« and hold it for 2 seconds.
– The LED goes out.
Notes:
When you switch the player on again, playback starts at the same point as
when it was switched off.
The player automatically switches off when the battery is low.
Adjusting the volume
1 To adjust the volume, press »+« or »« as many times as necessary during
playback.
Activating and deactivating the key lock
When the key lock is activated, all the buttons on the player are disabled.
1 To activate the key lock, press and hold down »
«.
2 To deactivate the key lock, press and hold down »
« again.
Resetting the player
In the event of a malfunction during operation or if the player no longer re-
sponds to key commands, you can reset the player.
1 To reset the device, use a pointed object such as a paper clip to press
»RESET«.
Note:
When resetting, the player should not be connected to the computer or the
USB charging device.