Filter
Top Products
32
USING EXTERNAL DEVICES _______________
Connecting a multi-channel amplifier or digital
two channel audio system
The digital multi-channel sound of a DVD can best be decoded and
played back with a multi-channel audio/video amplifier (Dolby*
digital decoder or DTS).
1 Plug a standard cinch cable into the cinch socket »COAXIAL«
(digital audio signal) on the television and into the correspond-
ing socket on the digital multi-channel amplifier.
2 Plug a standard cinch cable into the cinch sockets »VIDEO«
(picture signal), »A/L« (left audio signal) and »A/R« (right
audio signal) on the television and into the corresponding
sockets on the digital multi-channel amplifier.
Note:
Even if you are using a digital connection, you should still make
an analogue audio connection as it is possible, depending on
the disc type, that no signal can be output via the »COAXIAL«
socket.
VIDEOA/L A/R
COAXIAL
AV
WT–A
* Manufactured under licence from Dolby Laboratories Licensing Corporation.
“Dolby”, “Dolby Pro Logic”, “Dolby Digital” and the double-D symbol “
ij” are
trademarks of the Dolby Laboratories Licensing Corporation. Copyright 1992
Dolby Laboratories, Inc. All rights reserved.