Filter
Top Products
ASM VH 0
STOP
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Tuning
Automatic search
2. Press CH+/- button to move
the indicator to SEARCH,then
press VOL+ to enter the
submenu, press CH+/- to select
AUTO.
3. Press VOL+ button, then
AUTO mode will work. The
TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
After searching
Press CH+/- button to check the channels.
If the colour is abnormal in a certain channel, it may be the
colour system has not been set properly, so you should
adjust it to the proper system (Reference to page 7).
1. Press MENU button repeatedly to select the TUNING
menu ,and the function menu will displayed in the following
sequence:
PICTURE SOUND TUNING FUNCTION
84.13MHZ
AA
BB
CC
TUNING
POSITION 2
BAND VH
SKIP OFF
SEARCH
SELECT CONFIRM
FAST TUNE: This function is same as AUTO, but is can
make the search time shorter(can only available in some
areas), generally, please use the AUTO function.
84.13MHZ
AA
BB
CC
TUNING
M.F.T UP
FINE TUNE DOWN
AUTO
FAST TUNE
SELECT CONFIRM