Haier 42EP25BAT Flat Panel Television User Manual


 
Íâ¹ÒÑïÉùÆ÷ʹÓÃ˵Ã÷
Before turning on the PDP , ensure you have connected the line between the speaker and the PDP
1 Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. (See figure),
lay the two speaker aside of the PDP.
3 Fix the speaker to the PDP with the screws 4-ST 4X16 .
2 Insert the pothook to the faucet of the PDP screen .
Connect the speaker to the speaker terminal of plasma screen:
Press the speaker terminal and insert the connecting cable into the terminal slot.
Release the speaker terminal and ensure that the white connecting cable is inserted in the terminal slot marked red and black connecting
cable is inserted in the black terminal slot, and that anode and cathode poles are correctly connected. (See Figure )
The left speaker
The right speaker
L R
EXT SPEAKER
Install the Speakers(42EP25 AT/42HP25 AT/ )B B 42EP25SAT/42HP25SAT
10 PLASMA TV
25.400
\U+2592\U+255A\U+2514\U+00B2
25.400
\U+2592\U+255A\U+2514\U+00B2