Filter
Top Products
CH+
CH-
VOL- VOL+
MENU
Watching TV Programs
Watching TV programs
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
How to select the TV program
Select the desired program
1. Use the direct number selection button
2. Use the CH+/- buttons
Press the CH+ button to select the channel of the larger number.
Press the CH- button to select the channel of the smaller number.
Press the button from 0-9 to select a one-figure channel.
If you want to select a double figures channel, press the
figure-selection button and change it into two-figure mode, then
press the number of the channel.
If you want to select a three figures channel, press the figure-selection
button and change it into three-figure mode, then press the number
of the channel.
Select the desired sound
Press the VOL+/- buttons to adjust the volume to your need.
If the colour or sound of a certain channel is
abnormal
If the TV set you bought is
abnormal in colour or sound in a
certain channel, it might be
because the colour or sound
system has been set improperly.
You may follow the instruction
below to adjust it. Press the
MENU button, then press CH+/-
buttons to select function menu,
and you can see the form . Then
press VOL+ button to enter sub-
menu.
If the colour of the picture is abnormal
Press the CH+/- buttons to move the indicator to "Color Sys.", and
press the VOL+/- buttons to select the proper color.
Refer the above steps to enter the
Program edit menu. Press the CH+/-
buttons to move the indicator to
"
Sound Sys.", and press the VOL+/-
buttons to select the proper sound.
If the sound is abnormal
Program NO. 2
Skip Off
Lock Off
Sound Sys. DK
Fine tune <144.20MHz>
Program edit
Language English
Screen Saver On
Curtain
Color sys. PAL50
HDM scan 60Hz
Transparency On
Tilt 0
MENU
Picture
Sound
Tune
Setup
Timer