Filter
Top Products
Basic Operating Instructions
- button
Press to select additional channels (digital and analog) being broadcast by the
same station. For example, to select digital channel “11.1”, press “11”, then
press “-” and “1”; to select analog channel 13.0, press 13 first, then press -
and 0.(You must press - and 0 when you select analog channel. If you just press
the number(eg.13), you will get digital channel)
CH.LIST button(only available in digital signal)
Press to display the digital program list. Press CH+/CH- to select the item and
OK button to select the channel you desired.
FAV.LIST button(only available in digital signal)
Press to display favorite list. Press CH+/CH- to select the item and VOL+ to
select the channels and VOL- to select NONE.
ARC button
ARC Button: Press to select between NORMAL, WIDE and ZOOM mode while
in Digital TV Mode, and NORMAL, ZOOM, 16:9 and 4:3 in Analog TV mode.
NOTE: WIDE, 16:9 and 4:3 are only available in some models.
The aspect ratio can only be adjusted when 16:9 signal input in Digital TV mode.