Haier HL19SL2 Flat Panel Television User Manual


 
Operation
EN-13 Haier LED HDTV
Channel Skip
2Analog
3Analog
4Analog
5Analog
5-1 Digital
6Analog
7Analog
8Analog
9Analog
10Analog
Select
Back
EXIT
Set
Video
Audio
Channel
Lock
Function
ENTER
CH+/-
VOL+/-
Channel LabelsY : Allows you to name the channel
that is selected. Press VOL+/ENTER button to
enter the submenu.
Channel Label Set
Channel Index
Channel Label
Select
Back
EXIT
Video
Audio
Channel
Lock
Function
1
CH+/-
VOL+/-
Then press
CH+/- button to select Channel Index
and VOL+/- button to select the position of the item that
you want to change, afterward press INPUT to input the
numbers and symbols and ENTER button to conrm.
Time Shifting ModeY : To turn the Time Shifting
Mode on or o.
Set the
A Time Shifting On, then insert the USB drive in
the USB input.
Press
B PLAY/PAUSE to play or pause the program. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played
by pressing the STOP button.
-00:00:01
1x
7:00 7:30
-00:00:01 7:00 7:30
1.Timeshift time. The time oset to the current time.
2.Playback status: It shows the playback status for
timeshift component.
Press B VOL+/ ENTER button to enter the menu
and CH+/- button to go up and down to select the
desired option.
Press
C VOL+/ ENTER button to conrm and VOL+/-
button increase and decrease the level to adjust the
selected option to your preference.
Repeat step 2 and step 3 until desired audio quality
D
has been achieved.
Function
Tuner ModeY :Press VOL+/ENTER button to select
Antenna or Cable.
Channel ScanY : Press
VOL+/ENTER button to start
to scan, press EXIT to cancel.
Channel Scan
Status: Scanning... Antenna
Analog Channels: 4
Digital Channels: 3
Cancel
EXIT
40%
Video
Audio
Channel
Lock
Function
All channels now available will be automatically
preset in order .After the search has nished, the
rst program number will display on the screen. This
search automatically adds only the active channels in
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
Channel SkipY :Press VOL+/ENTER button to
enter the submenu, then press CH+/- button
to
select the channel number (eg.2) and press
ENTER to conrm, a mark will be display in the
pane as follows and this channel will be skipped
next time you press CH+/- button but you can press
digits button to select the channel
. If you want to
resume the channel, press ENTER button again.