Haier HL19T Flat Panel Television User Manual


 
Menu Operations
Function Menu Options
1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
2. Press VOL+/OK button to enter the Function menu and CH+/CH- to go up and
down to select the desired option .
3.Press VOL+/OK button to confirm andVOL+/VOL- increase and decrease
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Language: PressVOL+/VOL- button to select language of the OSD.
OSD Timeout: Press VOL+/VOL- to select Middle, Short and Long to change the
time of the OSD display.
OSD Transparency: PressVOL+/VOL- to select among Low, High and Middle
to change the transparency of the OSD. To select Low, the OSD is opacity.
Screen Mode: PressVOL+/VOL- to select among
to change the display mode. ( display mode may differ from
different inputs)
Blue Screen: PressVOL+/VOL- to select On , the screen will be in blue after
seconds if there is no signal.
Time Setup: PressVOL+/OK to enter the submenu.
Time Zone: PressVOL+/VOL- to select the appropriate time zone.
Full Screen, Normal, Wide,
Zoom and Cinema
3
DPMS: PC Power Management. To set On, the set will be in standby mode
automatically if no signal in 2 minutes; if signal input , the set will be on again
automatically.
Function
Language English
OSD Timeout Short
OSD Transparency Middle
Screen Mode Full screen
Blue Screen On
DPMS On
Time Setup
Closed Caption
Default
Select
Back
EXIT
CH+/-
VOL+/-
Video
Audio
Channel
Lock
Function