Haier HL22K1 Flat Panel Television User Manual


 
DVD System Setup ....................................................................................................
General Setup Process
1.Press the setup button, the
general set up page will be
displayed press twice the
preference page will be displayed
2.PressA/Yto select, the
item, then press_ to enterthe
submenu.
3.PressA/Ytoselect then
press PAUSE to confirm.
4.Press SETUPrepeatedly to
exit the set-upmenus.
NOTE: Preference page wilt be
displayed when there is no DVDin
the unit. Toaccess this page, press
SETUP button twice.
General Setup Page
ASPECT RATIO DESCRiPTiON
When using theDVD with the internal mY,
select 4= 3/LB.
The /bllowing iq/brmation applie_" only
when the DTDoutput is connected to an
external TT.
®4:3/PS (PS = Pan and Scan)
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4:3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) T_ Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
t16:9
You may select this if you have a widescreen (16:9) T_ Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
@