Filter
Top Products
Menu Operations
Channel Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
Note: This menu appears only in TV mode .
2. Press CH+/CH- button to enter the channel menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4.
Functions:
1. CH NO. : Press VOL+/VOL-to go up and down to set the channel number.
The display will show the current playing channel.
2. NAME: Allows you change the name of the channels in analog signal.
And display the channel name automatically in digital signal.
Repeat step 2 and step 3 until desired settings have been achieved .
CH NO 11.1
NAME
TUNER CABLE
SKIP OFF
AFC ON
FINE TUNE
AUTO SCAN
CHANNEL
.
Only available in analog signal
Functions:
AUTO CONFIG :
PHASE :
CLOCK :
H POSITION : Picture horizontal position adjust
V POSITION : Picture vertical position adjust .
Automatically adjusts picture location frequency and phase
parameters .
Removes any horizontal distortion and clears or sharpens the displayed
characters .
Adjust the TFT-LCD to match the PC input source clock frequency
Adjust Menu Options Continued
63.25MHZ