Haier HLE20BB Flat Panel Television User Manual


 
Menu Operations
Function Menu Options Continued
Note: Select CC1 for full translation of the primary language such as English in
your area. Select CC2 for secondary language translation such as French or
any other language that may be broadcast in your area.
4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF.
5. RESET : Press VOL+ to reset some settings to the factory default .
To set On, the screen
will be in blue screen after 3 seconds if there is no signal.
Adjust Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
ADJUST
AUTO CONFIG
PHASE
CLOCK
H POSITION
V POSITION
Note: This menu is only appears in PC mode .
2. Press CH+/CH- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
Functions:
AUTO CONFIG : Is opted for adjustment of picture location frequency and phase
parameters .
PHASE : Removes any horizontal distortion and clears or sharpness the displayed
characters .
CLOCK : Adjust the TFT-LCD to match the PC input source
H-POSITION : Picture horizontal position adjust
V-POSITION : Picture vertical position adjust .
0
50
50
50