Haier L26A16 Flat Panel Television User Manual


 
Switching ON/OFF the TV set
1 first, connect power cord correctly and the power indicator will light .
2 If the indicator is lighting in red, press the digit buttons or CH+/- button on the remote
controller again or POWER or CH+/- button on the TV set.(with the exception 0 digit)
3 If you want to exchange to standing by status, please press down button on the remote
controller.
4 Disconnect the power supply or unplug the television if it is intended to completely cease
the television performance.
Set up your TV
Choose the Menu Language
When you start using your set for the first time, you must select the language which
will be used for displaying menus and indications.
-There are several options you might need to set up in order for your TV to work
properly. Read the instructions that follow.
-In the manual, the OSD(on screen display) may be different from your TV`s,
because it is just an example to help you with the TV operation.
1 Press MENU button and then use CH+/-
button to select the Function menu.
2 Press VOL+/- button and then use CH+/-
button to select Language.
3 Select your language with VOL+/- button and
press the MENU button to confirm you selection.
4 When you are satisfied with your choice, press
the EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Choose the Input Source
If you hope to enjoy the picture from the external input source,
before to select the source, you need to connect the devices,
otherwise, when you select the source, the snowflake,blue
screen or no signal will appears on the screen.
Press TV/AV button on television or remote
control, the menu appears on the screen.
Then press CH+/- to select the desired option,
and press VOL+/- to ensure it.
Source
MENU
FUNCTION
AUDIO
ADJUST
TUNING
TIMER
PICTURE
West Europe
Language
Menu Timeout
Menu Backgroud
Blue Screen
Calendar
Teletext Language
Restore Default Value
English
15 seconds
Transparent
Off