Haier L26A8A Flat Panel Television User Manual


 
ANT IN
HDMI/DVI
IN1
PC IN
Pr/CrPb/Cb
Y
IN2
SCART2
Y/C
SCART1
RGB
HDMI/DVI
IN2
AC IN
Pr/CrPb/Cb
Y
IN1
HD-AUDIO
HD-AUDIO
PC/DVI
AUDIO IN
How to connect
1. To get the best picture quality, adjust the PC
graphics card to ( 1024x768),60Hz.
2. Use the TV`s PC IN port for video
connections, depending on your PC
connector.
3. Then, make the corresponding audio
connection. If using a sound card, adjust the
PC sound as required.
How to use
1. Turn on the PC and the TV.
2. Use TV/AV on the remote control to select
PC source.
3. Check the image on your TV. There may be
noise associated with the resolution, vertical
pattern, contrast or brightness in PC mode. If
noise is present, change the PC mode to
External Equipment Connections
PC connection
another resolution, change the refresh
rate to another rate or adjust the
brightness and contrast on the menu
until the picture is clear. If the refresh
rate of the PC graphic card can not be
changed, change the PC graphic card or
consult the manufacturer of the PC
graphic card.
NOTES:
1 Use a PC cable.
2 Avoid keeping a fixed image on the
TV's screen for a long period of time.
The fixed image may become
permanently imprinted on the screen.
3 The synchronization input form for
Horizontal and Vertical frequencies is
separate.
Resolution
Frame
frequency
(Hz)
Line
frequency
(Khz)
VGA
SVGA
XGA
640*480 31.5KHz 60Hz
800*600 37.9KHz 60Hz
1024*768 48.4KHz 60Hz
Mode
Resolution