Haier L32A9 Flat Panel Television User Manual


 
20
Using Remote Control function

Mute, freezing and playback
Mute setting
In case an important guest visits you or you receive an incoming call
while watching TV program, you can simply press the Mute key on the

key or the Vol + key again may restore the sound.
Notice:
1. When pressing the Vol- key in the Mute mode, the value of
volume decreases, however it is still in the mute display.
2. After it is muted, any other operations of the TV set can be
carried out in the mute mode.
3. If you press the On/Off to enter the standby mode or disconnect
the AC power supply, the TV set will exit the mute mode after
being turned on again.
4. If no other operations are made, the mute indication is always
displayed.
Picture freezing
function


Playback function
The quick playback function enables you to quickly access the TV
channel you watched the last time.
1. Assuming the number of the TV channel you


shown in the right diagram).
2. If you want to go back to Channel 8 you
watched just now, simply press the Playback
key.
3. If you want to go back to Channel 18
immediately, simply press the Playback key
again.
1.
2.
3.
Notice:
This function needs to be enabled in TV signal
mode.