You can watch TV program in a presetting channel.
How to select the desired program
1 Using "Program number" buttons
.
Press digit button to select the program.
If 2-digit or 3-digit programs are selected , press
digit buttons you needed continuously within 3
seconds
If selected channel program is set at Lock on mode
and no password has been entered after initiation of
the television, the screen will indicate require password
entry. If wrong password is entered, channel selection
will fail and previous program will still stay on the screen.
The program locking password can be modified in the
preset menu and previous password will be required.
2 Using CH+/- button.
Press CH+ button to select a channel number in
number increasing direction.
Press CH- button to select a channel number in
number decreasing direction.
(Note: If Skip is ON on one channel, press CH+/- button,
the channel will not appear.)
How to select the desired sound
Press VOL-/+ button on the remote controller or
the front of the TV set to adjust the volume level.
The range is 0~100. When the volume buttons are
pressed the volume level is displayed automatically
on the TV screen.
Tuning menu
Volume