Haier L52A18-A Flat Panel Television User Manual


 
Watching TV Program
You can watch TV program in a presetting channel.
How to select the desired program
1 Using "Program number" buttons.
Directly enter the channel number with the numeric keypad on the remote control.
If to select channel numbers of double-digit or three-figure ,press continuously the
numeric buttons in three second.
2 Using CH+/- button.
Press the CH+ button to select a channel number in number increasing direction.
Press the CH- button to select a channel number in number decreasing direction.
How to select the desired sound
Press VOL+/- button on the remote or the front of the
TV set to adjust the volume level. The range is 0~100.
When the volume button are pressed the volume level is
displayed automatically on the TV screen.
Volume
To select the TV mode
Before watching TV program, you may ensure your TV in TV mode.
Press TV/AV button to select TV mode.
17
Quick program view
1 Suppose the channel number you used just now is 8 and the channel
number you are using is 18 (as shown in the figure).
If you want to return to the last watched program channel 8, you can
simply press the Q.View button.
If you want to return to channel 18, press the button again. Use this
function, you can easily change between the channel you are using and
the channel you used last Timer.
2
3
This function enables quick swap to the last watched program.
Shuttle function
Press SHUTTLE button about 3 second, and the display Channel Stored
on the screen, at the time, you may operate other, then if you scan over
program, you may press again shuttle button to return to the setting
program.
Shuttle function enables quick swap to setting program.
Channel Stored