Haier LD50U7000 Flat Panel Television User Manual


 
-21-
Files encoded in the following formats are supported.
Picture
Image Ext. lename Photo Format Suggest Resolution Max Width Max Height
JPEG .jpg, .jpeg Base-line 15360×8704 15360 8640
Progressive 1024×768 1024 768
PNG .png Non-interlace 9600×6400 9600 6400
Interlace 1200×800
1200 800
BMP .bmp 9600×6400 9600 6400
Audio
Audio Codec File extension Bit Rate Remark
MPEG1/2 Layer1 MP3 32Kbps ~ 448Kbps (Bit rate)
16KHz ~ 48KHz (Sampling rate)
MPEG1/2 Layer2 MP3 8Kbps ~ 384Kbps (Bit rate)
16KHz ~ 48KHz (Sampling rate)
MPEG1/2 Layer3 MP3 8Kbps ~ 320Kbps (Bit rate)
16KHz ~ 48KHz (Sampling rate)
AC3 N/A (work with vide les
only)
32Kbps ~ 640Kbps (Bit rate)
32KHz ~ 44.1KHz, 48KHz (Sampling
rate)
EAC3 N/A (work with vide les
only)
32Kbps ~ 6Mbps (Bit rate)
32KHz ~ 44.1KHz, 48KHz (Sampling
rate)
AAC-LC M4A/AAC Free Format (Bit rate)
8KHz ~ 48KHz (Sampling rate)
For Miracast feature only
WMA WMA 128 bps ~ 320Kbps (Bit rate)
8KHz ~ 48KHz (Sampling rate)
Follow WMA 7, WMA 8, WMA 9
Standard
Video
File extension Container Video Codec
dat, mpg, mpeg MPG, MPEG MPEG1,2
ts, trp, tp, m2ts TS MPEG2, AC1, AVS
vob MPEG2-PS MPEG2
mp4, mov MP4 MPEG1,2,4, Xvid, VC1, Motion JPEG
rm, rmvb RMVB,RM Rv30, rv40
.mkv MKV MPEG 1,2,4, Xvid, VC1, Motion JPEG
.avi AVI MPEG1,2,4 Xvid, VC1, Motion JPEG
.asf, .wmv ASF MPEG2,4 Xvid, VC1
Remarks:
1. USB interface of digital multimedia player is not all-purpose. So when some USB devices could not be
recognized, the problem is usually not the performance failure but due to device driver.
2. Because USB devices and memory capability are different, the time needs for multimedia player to read
information are also different. So the information reading speed of the player temporarily getting slow are not the
performance failure.
3. The voltage supplied to USB interface is 5V, and the most electrical current is 500mA. When some interface
criteria of USB devices are different from standard USB protocol, digital multimedia player may be unable to
recognize USB devices correctly, which is normal status.
4. USB could be used as an interface to update software.