Filter
Top Products
Specication and Format
LED -LCD television Owner’s Manual 21
On Volume ▲
Press
5
/
6
to select the Power on Volume option,
and then press
3
/
to freely adjust the volume
within the range of 0~100.
Unlock Setting ▲
Press
5
/
6
to select the Unlock option, and then
press
to clear all the lock settings, namely set all
the lock setting options as OFF; the Preset Channel
is set as OFF and max volume returns to 100 (except
password).
Streaming Media Playing
System
Note
The diagrams in the following section are R
schematic and only for your reference. Please see
the actual product if necessary.
Supported file formats:
A
Picture: •
*
. JPEG;
Music: •
*
. Mp3(8-320kbps; WMA(32-192kbps);
AAC(16-576kbps)
Movie: •
MPEG4:
*
. avi files in accordance with Div*4. x/5. x
Protocol;
MPEG2: some
*
. mpeg files;
MPEG1:
*
. dat and some
*
. mpeg files;
RealVideo
Text: •
*
. Txt.
Note
Due to the particularity of file coding, some files R
may be unable to be read.
Supported equipment:
B
Support the equipment that supports Mass Storage
Protocol and whose file system is FAT/NTFS/FAT16/
FAT32, such as some USB disks, mobile hard disks,
card readers, MP3 players and digital cameras.
If USB equipment could not be identified due
to unsupported file system, please format the
equipment to the above-mentioned file system;
The external card reader supports most of the digital
C
cards in the current market; the types of digital cards
that can be read are relevant to the performance
of selected card reader; you may attach standard
mobile hard disks (working voltage 5.0V, working
current not higher than 500mA); during media
playing, do not pull out storage media, otherwise it
may cause system halt, damage the files in storage
media or damage USB equipment; sometimes, the
TV may halt due to overhigh information error rate,
in which case you should restart the system; there
are a lot of nonstandard USB mobile equipment
in the market, they may not be identified when
connected to the streaming media playing system;
the above phenomena may also occur on computers
and are not the TV’s fault.
To achieve smooth playing, ensure the following:
D
The file code rate should be lower than 300KB/S; •
Due to the limitation of USB signal transmission •
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
Use high-speed USB equipment in conformity •
with USB2.0 Interface Standard; if USB equipment
in conformity with USB1.1 Interface Standard is
used, the playing may be unsmooth.
Although many movie files are with such postfixes as
E
avi and mpeg, actually there are several formats in the
files; however, the TV can only play some files in avi
and mpeg formats. Some files with the postfix "dat"
are not movie files, but data files commonly used in
computers, and they can not be played as movies.
Start/Exit Streaming Media Playing
System
Press A USB on the remote control unit to select the
streaming media function.
Insert USB equipment into corresponding USB
B
interface 2s after starting the system.
After entering the system menu, press
C
3
/
on
the remote control unit to select the required USB
equipment, and then press
5
/
6
on the remote
control unit to select the required file.
Press
D OK to enter the selected file.
To exit the streaming media playing system and
E
watch a TV program, you must return to the
streaming media main menu at first (to protect
equipment), and then press SOURCE to select TV or
directly press USB to return to the TV mode.